...
| Kodblock |
|---|
# Overrides applications default vp-config.properties #Location where certificate files are found TP_TLS_STORE_LOCATION=/etc/mule/conf #Truststore settings, what CAs and certificates VP should trust when communicating with #consumers and producers. TP_TLS_STORE_TRUSTSTORE_TYPE=jks TP_TLS_STORE_TRUSTSTORE_FILE=truststore.jks TP_TLS_STORE_TRUSTSTORE_PASSWORD=password #Settings for the producer connector, when VP acts as producer, receiving calls from consumers TP_TLS_STORE_PRODUCER_TYPE=jks TP_TLS_STORE_PRODUCER_FILE=keystore.jks TP_TLS_STORE_PRODUCER_PASSWORD=password TP_TLS_STORE_PRODUCER_KEY_PASSWORD=password #Settings for the consumer connector, when VP acts as consumer, making calls to producers TP_TLS_STORE_CONSUMER_TYPE=jks TP_TLS_STORE_CONSUMER_FILE=keystore.jks TP_TLS_STORE_CONSUMER_PASSWORD=password TP_TLS_STORE_CONSUMER_KEY_PASSWORD=password |
Typiska inställningar i vp-config-
...
override.properties
| Kodblock |
|---|
# Overrides applications default vp-config.properties
# Mule 3.7.0 and later
TP_HOST=0.0.0.0
###############################################################################################
# Comma separated list of ip addresses that should be valid to call virtual services (VP)
# using http (and of course valid headers for authorization). When using https this list
# is not used.
#
# IP_WHITE_LIST=127.0.0.1,127.0.0.X,127.0.0.Y
###############################################################################################
IP_WHITE_LIST=<your list>
# Standard properties for an external ActiveMQ broker, see soitoolkit-mule-jms-connector-activemq-external.xml.
SOITOOLKIT_MULE_AMQ_BROKER_URL=failover:(tcp://<your host x>:61616,tcp://<your host y>:61616)
##############################################################################
# Properties for service "VagvalRouter"
#
# Mandatory comma separated list of ip addresses (or subdomains, e.g 127.0.0 for all ip adresses under that domain)
# that should be valid to call virtual services (VP) using http (and of course valid headers for authorization).
# When using https this list is not used.
#
# IP_WHITE_LIST=127.0.0,127.1.2.3,127.4.6.7
#
# Mandatory identifier of this VP instance to be used when communicating over http with other
# SKLTP components
#
# VP_INSTANCE_ID=THIS_VP_INSTANCE_ID
#
# Optional http header to be used by e.g a load balancer to set the sender ip adress. A typical scenario
# is when a service consumer calls VP through a load balancer and VP would like to have information
# regarding the consumers ip adress.
#
# VAGVALROUTER_SENDER_IP_ADRESS_HTTP_HEADER=X-Forwarded-For
#
##############################################################################
TP_SOKVAGVALSINFO_URL=http://localhost:8080/tak-services/SokVagvalsInfo/v2
VP_INSTANCE_ID=<YOUR VP INSTANCE ID>
########################################################################################
# Properties for WSDL-query re-write of URL's (supporting WSDL-lookup using ?wsdl)
# when VP is fronted with a reverse-proxy/load-balancer that changes any of the below
# properties before forwarding to VP.
# Refer to response transformer: se.skl.tp.vp.util.wsdl.WsdlQueryReferencedUrlsResponseTransformer
#########################################################################################
VP_HTTP_HEADER_NAME_FORWARDED_PROTO=X-Forwarded-Proto
VP_HTTP_HEADER_NAME_FORWARDED_HOST=X-Forwarded-Host
VP_HTTP_HEADER_NAME_FORWARDED_PORT=X-Forwarded-Port
###VAGVALROUTER_SENDERID=2.5.4.5
VAGVALROUTER_SENDERID=OU
# Control if event-logging should be done to JMS or not.
ENABLE_LOG_TO_JMS=false
# Enable resend on VP009. Logs 'Could not route. Will retry after ... millisec' if first request fails.
# To disable remove property or set RETRY_ROUTE_AFTER_MS=0
RETRY_ROUTE_AFTER_MS=2000
#################################################################
# Properties for service "resetVagvalCache"
#
# RESETVAGVALCACHE_INBOUND_URI=URI for reset cache
# RESETVAGVALCACHE_PORT=Port number for reset cache
# LOCAL_TAK_CACHE=Path to file where local TAK cache should exist
# Default LOCAL_TAK_CACHE=${user.home}${file.separator}.tk.localCache
#################################################################
LOCAL_TAK_CACHE=<your>/<path>/<to>/.tk.localCache
RESETVAGVALCACHE_TIMEOUT_MS=30000
#####################################################################################################
# HSA cache properties #
# #
# HSA_FILES=<file1,file,filex> #
#####################################################################################################
# List if files to be read by HSA cache, first file is master, rest is complementary
HSA_FILES=<your>/<path>/<to>/hsacache.xml,<your>/<path>/<to>/hsacachecomplementary.xml
#############################################################################################################
# Response timeout Feature properties
# It is possible to control response timeout on each service in VP, if the service supports it.
# Default values for all services are defined in SERVICE_TIMEOUT_MS, to override follow the convention
# described below and make sure the service to use supports this feature.
#
# Convention: feature.featureresponsetimeout.<service contract namespace>=5000
# Example: feature.featureresponsetimeout.urn.riv.crm.scheduling.GetSubjectOfCareScheduleResponder.1=5000
#############################################################################################################
# Default timeout for synchronous services
SERVICE_TIMEOUT_MS=30000
feature.featureresponsetimeout.druglogistics.dosedispensing=5000
#Infektionsverktyget
feature.featureresponsetimeout.urn.riv.processdevelopment.infections.DeleteActivityResponder.1=5000
#####################################################################################################
# Keep alive Feature properties
# It is possible to control keep-alive settings on each service in VP. If a service has keep-alive #
# enabled all consumers and producers are affected. Default setting is used by all services and #
# is set to feature.keepalive=false. To enable keep-alive for one service use this convention: #
# Convention: feature.keepalive.<service contract namespace>=true #
# Example: feature.keepalive.urn.riv.crm.scheduling.GetSubjectOfCareScheduleResponder.1=true #
#####################################################################################################
#Default setting is false, used by all services that does not specify any specific configuration
feature.keepalive=false
feature.keepalive.urn.riv.crm.scheduling.GetSubjectOfCareScheduleResponder.1=false
|
...
Det är vid behov möjligt att låta VP göra viss loggning via logga mule meddelanden till en socket, funktionalitet framtagen för att kunna logga information till Loghandlern och eller liknande applikationer.
För att aktivera loggningen måste dels host och port konfigureras samt vilken information vilka meddelanden som skall loggas.
Konfigurera host/port för
...
socketappendern
Konfigureras i ${sys:mule.home}/conf/vp-socketappender.properties.
...
| Kodblock | ||
|---|---|---|
| ||
############################################################################################################# # Socketlogging properties # # socketappender.host - hostname/ip for logging to # socketappender.port - port number logging to # # Default values - No default values. If not configured socketlogging will be turned off. ############################################################################################################# socketappender.host=localhostine-dit-app01.sth.basefarm.net socketappender.port=900043706 |
Konfigurera vad som loggas
Konfigureras i ${sys:mule.home}/conf/vp-config-overideoverride.properties.
Exempel:
| Kodblock | ||
|---|---|---|
| ||
########################################################################################################################################################## ## Socket logger ## ## USE_SOCKET_LOGGER - true or false ## Default - false ## SOCKET_LOGGER_CATEGORIES - Categories should be logged ## SOCKET_LOGGER_SERVICE_CONTRACTS - Service contract to be logged ################################################################## USE_SOCKET_LOGGER=true SOCKET_LOGGER_CATEGORIES=no-cat SOCKET_LOGGER_SERVICE_CONTRACTS= | ||
| Kodblock | ||
| ||
################################################################## ## Socket logger ##Default is false ## SOCKET_LOGGER_CATEGORIES - Message types to be logged ## If not defined or empty all categories will be logged ## USE_SOCKET_LOGGER - true or false ## ## Valid categories: xresp-out, xresp-in, xreq-out, xreq-in ## SOCKET_LOGGER_SERVICE_CONTRACTS - Service contracts to be logged ## Default - false ## SOCKET_LOGGER_CATEGORIES - Categories shouldIf benot loggeddefined or ## SOCKET_LOGGER_SERVICE_CONTRACTS - Service contract toempty all contracts will be logged ################################################################## ######################################################################################### USE_SOCKET_LOGGER=true SOCKET_LOGGER_CATEGORIES=noxresp-catout SOCKET_LOGGER_SERVICE_CONTRACTS= |
...